Ingham North Harbour Pre-Delivery Inspection

DETAILS

WIP# *

Make

Date of PDI Inspection *

Date PDI logged on NZTA site *

NZTA Site Number *

Full VIN No

Engine Number

Key Number/s

Colour

Trasnmission

Odometer Reading at PDI *

Service Campaigns and Safety Recalls Completed

SELECT/TICK EACH OPTION COMPLETED

1.EXTERIOR

1.1 Windshield Glass condition/Wiper/Washer function
1.2 Front Bumper / Radiator Grille
1.3 Side Door Mirrors
1.4 Door Window Glass
1.5 Front Door / Rear Door/exterior panels are dent free
1.6 Back Glass (Rear Cab window)
1.7 Rear Body alignment/security/Tailgate operation
1.8 Tires Pressure / Condition – Including Spare
1.9 Torque all Wheel Nuts (D-Max 110-125 Nm)
1.10 Body Color conformity/paint condition
1.11 Logo Emblem / Decal
1.12 Panel gaps within conformity
1.13 Parking aid Sensor installation/operation
1.14 Accessories correctly installed (Permitted Accessories only)

2. INTERIOR (Operation & Installation Completeness)

2.1 Door Trims
2.2 Sill plate
2.3 Steering Wheel Lock / Adjustment function
2.4 A/T Gear Position Light
2.5 Front Dash Panel (Console)
2.6 Other console (e.g. storage compartments)
2.7 Sun Visor & Vanity mirror
2.8 Seat Condition & Adjustment function
2.9 Seat Belt function /installation
2.10 Fuel Filler Lid Opener
2.11 Mat / Carpets (correctly and securely fitted)
2.12 Tool Bag & Jack, present and secure
2.13 Audio system Initial Set-up / Bluetooth / Speakers / Reverse Camera / Navigation positioning (All controls)
2.14 Check MID (Multi Information Display) All screens accessible. Data set to metric (fuel usage to L/100km and ambient temp to °C ) Date/Time and Service indicators set.
2.15 All SRS components installed correctly
2.16 Owner’s Manuals, Audio Guide, Service Warranty booklet, Roadside Assist decal upper R/H of windscreen and DPD decal in Upper glovebox.

3. ENGINE ROOM (Correction & Standard Check)

3.1 ADR/VIN Plate confirmed with Chassis VIN and install
3.2 Engine Oil level/condition
3.3 A/T Oil level/condition
3.4 Clutch Oil level/condition
3.5 Power Steering Oil level/condition (Mu-X only)
3.6 Brake Fluid level/condition
3.7 Coolant level
3.8 Washer Fluid level
3.9 Drive Belt tension/condition
3.10 Battery condition/voltage/clamp tension
3.11 Check Engine Harness & all Hoses for correct location
3.12 General engine room cleanliness (check for fluid leaks)

4. UNDER CARRIAGE (Installation &Leakage Check)

4.1 Steering unit
4.2 Brake System
4.3 Clutch System
4.4 Engine
4.5 Cooling system
4.6 Fuel System
4.7 Exhaust System
4.8 Transmission & Transfer Case oil levels
4.9 Final Drive oil levels (Front & Rear)
4.10 Wiring Harness installation
4.11 Check all Bolts, Nuts and Fasteners

5. ELECTRICAL DEVICE (Completeness & Function)

5.1 Fuse Boxes (Passenger & Engine room)
5.2 Central Lock / Remote Control
5.3 Side Door Mirror Adjusting / Folding / Warning Lamp
5.4 Power Window (set auto up/down function)
5.5 Windshield Washer / Wiper Motor
5.6 Cluster Meter Gauge / Warning lamp / Brightness
5.7 All switches (ESC/TCS, HDC, Stereo, Cruise Control, Diff Lock etc)
5.8 Head Lamp & Beam Level / Aim
5.9 Head Lamp Self Leveling Calibration
5.10 Fog Lamp
5.11 Indicator and Hazard Lights
5.12 Horn
5.13 Rear Combination Lamps & License Plate
5.14 Brake Lamp including High Stop
5.15 Interior/Courtesy Lights
5.16 Advanced Driver Assistance Systems

6. TEST

6.1 Instrument Cluster(All warning lights and gauges)
6.2 Start / Stop Engine (include IMMOBILIZER System)
6.3 Air Conditioning / Heater
6.4 Engine speed Idling / Accelerating/general function
6.5 Gear selection including 4wd operation
6.6 Clutch Operation (Pedal feel)
6.7 Steering Free play/ Steering wheel alignment
6.8 Vehicle alignment/tracking
6.9 Service brakes (Pedal feel, brake efficiency)
6.10 Parking Brake, operation & adjustment
6.11 Keys including spares (3)
6.12 G-IDSS – Clear all/any DTC’s and reset DPD Dilution Trip data

7. GENERAL INSPECTION

Outside
Engine Room
Wheels & Tyres
Body Inside
Instrument Panel
Seats
Floor
Trim
7.1 Removal of all factory plastic shipping protection (in and out)
7.2 Vehicle cleanliness/grooming interior/exterior

Presence of OTS (blue and red):

Connected services activated (ICM):

1. NV TRANSPORTATION TO THE NV PREPARATION AREA

Vehicle doesn’t start, transfer to the mechanical worshop
Fit the consumer cut-out fuse(s) Master3 (if tachograph).
Deactivate SuperSleep mode Kangoo2, Megane4, Koleos2, Zoe, Master3, Duster
Check the front/rear windscreen wipers

2. REMOVE VEHICLE PROTECTION – AFTER CLEANING, CHECK EXTERNAL ASPECT AND OPENINGS

Remove vehicle protection
Remove the protections, rubber and adhesives
Clean the bodywork
Bodywork (damaged, alignment, etc.)
Paintwork (scratches, stains, cracks, etc.)
Bumper (paintwork, alignment, scratches, etc.)
Rear view mirrors and windows/windscreens (stains, cracks in the windows/windscreens, etc.)
Check the operation of door openings

3. ENGINE COMPARTMENT

Engine oil
Coolant
Brake fluid
Windscreen washer fluid
Power-assisted steering fluid Trafic2, Master3
Transmission robotics fluid (ensure correct level / no leaks) Master3

CHECK LEVELS

3. ENGINE COMPARTMENT 12V BATTERY

Check state of 12V battery
Mounting and connection of 12V battery cables
Visual aspect of the battery (trace of oil, evidence of impact)
Fit battery cover (if any)

CAR AGE: If car age is >1year : Transfer it to the workshop to replace the 12V battery

4. TYRES AND WHEELS

Check valve caps are present
Check and adjust the tyre pressures according to the model.
Reset the tyre pressure monitoring system.
Check that the emergency spare wheel is correctly inflated (depending on model)

5. VEHICLE LUGGAGE COMPARTMENT

Check luggage compartment light Front/Rear**
Check wheel trims, plug of wheel, and antenna are present
Check that the inflating kit, and tyre repair aerosol are present**
Check the tool kit / towing lug is present**

**Depending on Model.

6. VEHICLE EXTERIOR: USING THE COMMANDS FROM PASSENGER COMPARTMENT

Brake lights
Hazard lights
Main beams”
Front fog lights
Reversing lights
Direction changing lights
Rear fog lights
Dipped lights
Sidelights
Number plate lights
Rotating dipped lights**
Day lights
Bend fixed dipped lights**

CHECK THE OPERATION OF LIGHTS (WITH MIRRORS). **Depending on Model.

6. VEHICLE EXTERIOR: USING THE COMMANDS FROM PASSENGER COMPARTMENT

Check the operation of the locking and unlocking from outside with key or cards

DRIVER'S SEAT – CHECK

Instrument panel, trip computer, warning sys. indicator and warning lights (No DTC’s or warning light present on cluster)
Glove box lighting
Storage compartment lighting
Vanity lighting
Front and rear courtesy lighting
Rear door safety locking**
Rear view mirror operation

**Depending on model.

ADJUSTMENT / REINITIALISATION

Initialise the windows and sunroof and check their operation
Initialise the automatic headlighting
Check dashboard language and change the language if necessary
Trip computer reset
Reinitialise the mileage before service display (kms/time)
Set the time**
Enter the radio code and check its operation
Check the headlight on audible warning (door opened)
Multi-Plex Configuration with CLIP

**Depending on model.

ADJUSTMENT / REINITIALISATION

Insert the SD card , and initialise the Navigation System**
No SD Card (Media Nav, Media Nav Evolution, R-Link2)**
Check firmware is up-to-date (Updated firmware number)
Check owners manual & wallet is present in glove box.

DO NOT UPDATE MAPS UNTIL THE VEHICLE IS REGISTERED. **Depending on model.

NON CONFORMITY ENCOUNTERED:

Non conformity noted on inspection.

Presence of OTS (blue and red:

8. FINISHING

Check state of 12V battery charge, and recharge it 30 minutes minimum (all models)

(Reminder: in case of battery alert, charge battery until Renault approved battery charger shows a smiley face!!) ”

Take a photo of the charger screen and upload.

Drag & Drop Files, Choose Files to Upload

8. FINISHING

Clean the instrument panel and check interior details
Fit registration plates and rego labels
Clean the vehicle (If necessary)
Clean the windows
Remove all protections except driver’s seat protection
Vacuum clean the interior and the luggage compartment.(If necessary)
Check the conformity of the vehicle documentations (model, language, exhaustivity)
Check for the spare set of keys or cards
Fit equipment or accessories that can be mounted by the preparation agent depending on model (wheel or exhaust trims, plug of wheel, cradle, antenna, upper layers, diag plug cover, etc.)
Check the installation of all accessories requested by the customer, that can’t be fit by the preparation agent (ref. NV Delivery Quality Sheet)
Check the fuel level and complete it if necessary (reserve fuel indicator off)
Check the AdBlue level and fill in at the maximum if necessary (Gauge indicator at the maximum and/or no light indicator on)
Treat non-conformities that can be treated by the preparation agent (e.g. scratches which can be removed with polishing) For matte paintings, all repairing must be done in the workshop; ban to use abrasive like polish.

ADDITIONAL INFORMATION FROM PDI INSPECTOR

Notes for Service Team or Manufacturer to be aware of.

Attach Pictures as required.

Drag & Drop Files, Choose Files to Upload You can upload up to 10 files.

CONFIRMATION OF COMPLETION

Confirmation of Inspection by Technician

I confirm this vehicle has been checked by me and passes all PDI requirment and is free from all issues and defects at time of PDI

Confirmation PDI escalated to Supervisor

I confirm this vehicle has been tested as required and any issues escalated to Workshop Management.

Technician *

PDI/WOF Inspector No.

Technician signature as acceptance of completion

Clear Signature